142 datasets found

Tags: ATMOSPHERE

Filter Results
  • Precipitation accumulated (mm)

    Precipitation measured on two proximal guages located at the double masted climate station between Badesø and Langsø at 40 m a.s.l.. The timeseries starts in 2007. Data from...
  • Snow depth (m)

    Snow depth measured on two proximal climate stations as a 3min average every 3 hours (m). The double masted climate station is located between Badesø and Langsø at 40 m...
  • Relative humidity @ 1000 cm - 30min average (%)

    Relative humidity measured on two proximal climate stations at 1000 cm above ground as a 30min average (%). The double masted climate station is located between Badesø and...
  • Relative humidity @ 200 cm - 30min average (%)

    Relative humidity measured on two proximal climate stations at 200 cm above ground as a 30min average (%). The double masted climate station is located between Badesø and...
  • wind speed 7.5 m - 10 min max

    Wind speed measured at a height of 7.5 m above ground, maximum measured during 10 min interval with time label at end of bin.
  • wind speed 7.5 m - 10 min average

    Wind speed measured at a height of 7.5 m above ground, average over 10 min interval with time label at end of bin.
  • wind speed 2 m - 10 min max

    Wind speed measured at a height of 2 m above ground, maximum measured during 10 min interval with time label at end of bin.
  • wind direction 7.5 m - 10 min average

    Wind direction measured at a height of 7.5 m above ground, average over 10 min interval with time label at end of bin. Direction is given clockwise from north as the direction...
  • wind speed 2 m - 10 min average

    Wind speed measured at a height of 2 m above ground, average over 10 min interval with time label at end of bin.
  • air temperature 2 m - 60 min sample

    Air temperature measured at a height of 2 m above ground, sampled once per hour. This timeseries is a continuation of measurements taken at the former town station since 1993,...
  • air temperature 7.5 m - 60 min sample

    Air temperature measured at a height of 7.5 m above ground, sampled once per hour.
  • downwelling shortwave flux - 5 min average

    Incoming shortwave radition, measured at a height of 2 m above ground, averaged over 5 min interval with time label at end of bin. The instrument response integrates over the...
  • downwelling longwave flux - 5 min average

    Incoming longwave radition, measured at a height of 2 m above ground, averaged over 5 min interval with time label at end of bin. The instrument response integrates over the...
  • air pressure - 60 min sample

    Atmospheric pressure, sampled once per hour. This timeseries is a continuation of measurements taken at the former town station since 2006, hence the 1h sampling frequency. The...
  • snow pit stratigraphy - manual measurement

    Snow pit stratigraphy, obtained during annual surveys at the end of the snow season. Missing information is indicated by -9999 for numerical and '-' for text columns.
  • snow pit temperature - manual measurement

    Manual measurments of snow temperature in snow pits, obtained during annual surveys at the end of the snow season. Missing information is indicated by -9999 for numerical and...
  • snow pit density - manual measurement

    Manual measurements of snow density in snow pits, obtained during annual surveys at the end of the snow season. Missing information is indicated by -9999 for numerical and '-'...
  • snow depth - manual measurement

    Manual measurements of snow depths at individual points or along transects, obtained during annual surveys at the end of the snow season. Missing information is indicated by...
  • precipitation - 60 min rate

    Precipitation, sampled once per hour from an accumulating gauge and converted into an hourly rate. Any phase (liquid or solid) is captured to the extent possible and given as...
  • relative humidity 7.5 m - 10 min sample

    Relative humidity measured at a height of 7.5 m above ground, sampled every 10 min.
You can also access this registry using the API (see API Docs).