42 datasets found

Station: arctic-station Tags: PHYSICAL GEOGRAPHY

Filter Results
  • T1-SoilTemperature

    T1-Soil temperature consists of temperature sensors installed in a soil pit. The sensors were installed in August 2018. The soil pit is located on the top of Pjeturssons moraine...
  • SoilWaterChemistry

    Soil water is collected from Østerlien 150 meters east of Arctic Station and near the weather station AWS2. Five soil water samplers (suction cup lysimeters, Prenart Super...
  • AWS3-SoilTemperature

    The automatic weather station AWS3 was installed in July 2013. It is located in the southern part of Blaesedalen (90 meters above sea level) in an open, gently rolling area. It...
  • AWS3-SoilMoisture

    The automatic weather station AWS3 was installed in July 2013. It is located in the southern part of Blaesedalen (90 meters above sea level) in an open, gently rolling area. It...
  • AWS2-SoilMoisture

    The automatic weather station AWS2 was installed in August 2012 in Østerlien just east of Arctic Station. The station is located approximately 25 meters above sea level in a...
  • AWS2-SoilHeatFlux

    The automatic weather station AWS2 was installed in August 2012 in Østerlien just east of Arctic Station. The station is located approximately 25 meters above sea level in a...
  • AWS1-GroundTemperature

    The automatic weather station AWS1 at Arctic Station was established in October 1990 and was removed in 2018. We included the main parameters from this station in the GEM...
  • SnowDepth

    Snow depth is measured at various sites. The position is either given by coordinates or by description. GPS coordinates are measured by GPS-system on the Magnaprobe from...
  • AWS2-SnowAirTemperature

    The automatic weather station AWS2 was installed in August 2012 in Østerlien just 100 meter east of Arctic Station. The station is located approximately 25 meters above sea...
  • AS-SnowDepth

    Daily manual readings of snow depth. Observations are performed daily just outside the scientific leader's house at Arctic Station. These observations were initiated 1 January...
  • AS-SnowCover

    Visual observations of snow cover are performed daily from Arctic Station. These observations were initiated 1 January 1991
  • AWS4-Meteorology

    The automatic weather station AWS4 was installed in August 2015. It is located 240 meters above sea level on the southern slope of Skarvefjeld. The mast is located on a...
  • AWS3-Meteorology

    The automatic weather station AWS3 was installed in July 2013. It is located in the southern part of Blæsedalen (90 meter above sea level) in an open gently rolling area. It is...
  • AWS2-Meteorology

    The automatic weather station AWS2 was installed in August 2012 in Østerlien just 100 meter east of Arctic Station. The station is located approximately 25 meter above sea...
  • AWS1-Meteorology

    The automatic weather station AWS1 was installed in October 1990 and removed in 2018. We included the main parameters from this station in the GEM database as most parameters...
  • AS-CloudCover

    Visual observations of cloud cover are performed three times a day (7:00, 12:00, and 17:00) from just outside Arctic Station. These observations were initiated in June 1993.
  • WaterTurbidity

    Automatic monitoring of water turbidity in the river Kuusuaq (Røde Elv). The turbidity (clarity of the water) is measured by a multiparameter sonde at a site just north of the...
  • WaterTemperature

    Automatic monitoring of water temperature in the river Kuusuaq (Røde Elv). The water temperature is measured by a multiparameter sonde at a site just north of the bridge (RE...
  • WaterPH

    Automatic monitoring of water pH in the river Kuusuaq (Røde Elv). The pH of the water is measured by a multiparameter sonde at a site just north of the bridge (RE 436-2). The...
  • WaterDischarge

    Water discharge in the river Kuusuaq (Røde Elv) is based on water level registrations and a relation between measured discharge (Q) and water level (h). The Q/h relation is...
You can also access this registry using the API (see API Docs).